开云棋牌

Introduction to SS1 Tubular Disc Retractor

Sealing material: NBR

Material: gray cast iron, ductile iron

Advantages: It can be connected to ductile iron pipes without welds or flanges

Description of SS1 Tubular Disc Retractor

The telescopic device can provide great convenience for the installation and replacement of urban water towers, pump houses, water meters, and valves. It also plays a good role in filling the expansion and contraction problems caused by temperature differences in long-distance pipelines, replacing U-shaped pipes. {Full name of the enterprise} - The sleeve type expansion device produced by the manufacturer's innovative pipeline can be used in water supply and drainage engineering. At the same time, we can also produce products with special parameters according to the needs of users, to meet the needs of gas, petroleum, chemical engineering, hydropower and other fields.

SS1 sleeve type disk extender

The connection forms include: double disk type, plug disk type, and socket disk type; Flange connection size shall be in accordance with current national standards, and anti pulling limit bolts can be added according to user requirements.

Precautions for Installation of SS1 Tubular Disc Retractor

1. The installation should be between * and * small lengths, which can be adjusted based on actual conditions.

2. During installation, loosen the bolts of the packing pressure plate, adjust the installation length, and install both ends and pipes (or valves, water meters) according to the design requirements. Then, check whether the packing is properly placed. * Press on the packing pressure plate, and tighten the bolts diagonally to prevent deviation, so as to prevent leakage.

3. The retractor is installed behind the check valve.

4. Both ends of the expansion joint need to be provided with buttresses, which do not bear axial tensile force and can be provided with anti pulling measures if necessary.

Technical Parameters of SS1 Tubular Disc Retractor